The Clone-A-Willy has always been a popular sex toy gift. The Clone-A-Willy, or CAW as I often call it, is an ingenious DIY silicone mold making kit marketed to make a replica of a penis, but you can use it to “clone” virtually anything; your hand, a vegetable, or another dildo you love and want two of. All you do is mix the molding powder, pour it into a long tube, insert the phallus of your choice, keep it still for a few minutes, then pour the silicone mixture into the impression you’ve created. Simple! (Except, the maintaining an erection in lukewarm goo part. Cock rings are a good fix for this!) People buy the CAW to send to a partner who lives far away, so they can make it and send it back to their sweetie like dick snail mail. With all this popularity around a penis casting kit, and the creative possibility of being able to make silicone molds at home with ease, customers began to wonder… is there a vulva version?
There was now a way to make a custom, fuckable, masturbation sleeve out of your bits!
At the time, Clone-A-Pussy (or CAP) was available, but not functional to use as a toy. There was a silicone version AND a version that let you make edible chocolate out of your vulva (or butthole) mold. It was like a 3D plaque of your crotch, but it wouldn’t be a penetrable toy. That is until… the CLONE-A-PUSSY PLUS+!!!!
In 2019, I was overjoyed to learn that our prayers had been answered. There was now a way to make a custom, fuckable, masturbation sleeve out of your bits! I had a lot of Clone-A-Willy experience both with my boyfriend’s dick and my hand as test subjects, but never had I ever attempted to mold my labia.
Because I am buddies with the amazing women who work at Clone-A-Willy, we thought it would be fun to have me make a mold, auction off my creation, and donate the proceeds to charity (I picked SWOP Behind Bars — a fund for supporting incarcerated sex workers.) But first, I had to actually make the damn thing!
The instructions were very straightforward, but because I was auctioning my CAP+, it had to be a perfect mold. They sent me a ton of extra molding powder so I could have a redo if I fucked it up. While it is surely possible to make an amazing mold on your first go, I highly recommend grabbing an extra bag of the molding powder if you want a bit of wiggle room to do multiple molds and pick the one that turns out best.
This was pre-COVID, so I got bikini waxed to get a smoother mold.
Preparation
This was pre-COVID, so I got bikini waxed to get a smoother mold. I was already a regular waxer, so it was just an extra step that was already convenient for me. While the molding alginate can stick to your pubes during the process, it’s not going to rip them out — but you should keep in mind that you’ll need to be more gentle when removing the mold. If you’re able to, a little trim will do the trick as well. While you can certainly keep all the pubeage in the world, it doesn’t translate as well into the silicone mold, and instead just makes it a bit bumpy.
Next, I laid all my supplies out. The kit comes with body-safe silicone which comes in two jars, one with clear silicone material and one with the silicone in the color of your choosing — these two jars mixed activate to create the final silicone facade! There’s a plastic bag with the alginate molding powder, as well as a container to make the mold in. These are the “sciencey” ingredients you will be working with.
The rest of the kit contains an elastomer sleeve and a hard plastic case, one that resembles the silhouette of a Fleshlight. There’s special glue for attaching the silicone mold to the sleeve once it dries, and some other odds and ends like a stick to insert into the mold as you let it dry (otherwise, no opening to your orifice!) And of course, instructions on how to do it! I would also recommend having these things available to make your molding process a breeze:
- A disposable cup or container for mixing the liquid silicone pre-pour
- A disposable utensil for agitating the silicone
- Mixing bowl for the alginate
- Timer (or y’know, your phone)
- Something to cover the floor that you don’t mind destroying (trash bag, paper towels, shabby old towel you’re going to throw away soon anyway)
- Privacy (unless you enjoy people watching you as you mold your crotch)
- BONUS: Fabric shaver (I will explain later)
The Molding Process
Because I am thoughtful, I figured the recipient of my CAP+ deserved my vulva in a more aroused state (more visible clit!) So I stuck a vibrator in my pants as I got my supplies ready. I read the instructions, and kind of mimed-out the timing on everything. There’s a lot of areas where I could fuck it up, but it was showtime.
I dumped the powder into a mixing bowl and added lukewarm water while whisking it with a fork. If the water you mix with the alginate is too cold, it solidifies too quickly and you have a lumpy beige brick. If the water is too hot, you have to wait around extra long with your crotch in a dish while it cools down and solidifies.
I was in a very awkward version of Hero Pose/Virasana if you want an accurate visual.
Once all the powder lumps vanished, into the molding tray/cup thing it went! The instructions suggest a lot of different positions, but I decided to set it on the ground, kneel over it, and lower my lips into it instead of trying to do it standing up. I was in a very awkward version of Hero Pose/Virasana if you want an accurate visual. As my labia displaced the mixture in the tray, it spilled over the edges and onto my floor. I felt around to make sure my clit was in there, and my vaginal opening was centered so that the toy itself would be functional and not have the opening off to the side.
There I sat. My knees began to complain, and I regretted picking this pose to do the mold. As the 3 minutes came to an end, I could feel that the mold had solidified because it was starting to separate from my body if I moved a little bit. Ever so slowly, I leaned forward to come off the mold, and there was my solid pancake batter-looking vulva cast!
Truthfully, my first mold was damn near perfect, but slightly off-center. I made a few more molds with the extra powder so I could choose the best one, but it was unnecessary in the end. I tried to do the mold standing and noticed that the position didn’t do my labia justice, you couldn’t see much on that mold. I went back to the dreaded kneeling pose with a blanket under my knees on a third run, and accidentally left my clit out and got some butthole in there. I learned that it is entirely possible to mold your butthole with this kit, but my first mold was the winner.
Pouring the silicone
I transferred the solid alginate to the lid of the toy as per the instructions. Then I stuck in the plastic device included in the kit designed to make sure there’s an “opening” to penetrate. Since the mold is a “negative” of my body, it was a little difficult to figure out an appropriate place for the opening, but my guesstimate turned out to be a good location.
Then with the whole case flipped upside down and ready to receive the silicone, I mixed the two silicone jars in a paper cup using a disposable fork. While I could have used a stainless steel mixing bowl, the cleanup was already going to be a lot with the alginate all over the place, so it was much easier this way. Once the jars were thoroughly mixed, I poured them into the tube as though I was drizzling syrup on ice cream. Then, I had to let it sit overnight and cure!
The alginate was moist and had perspired a bit overnight, but my mold turned out GORGEOUS.
The final product
At least it was ready! The alginate was moist and had perspired a bit overnight, but my mold turned out GORGEOUS. The only issue I encountered was that there were air bubbles in my alginate that caused little bubbles on my pussy’s mold. Being the creative genius I am, I got out my fabric shaver and VOILA, bubbles were gone. I think a pair of nail scissors would have sufficed, but the fabric shaver made it very even.
The silicone facade of my vulva now adorned a masturbation sleeve, and I felt like I was a famous adult performer with my very own Fleshlight!
—
I’m sure you want to know how the auction went, eh? It was a success, thankfully! While the toy itself may only have the personal meaning and value of the person it’s a mold of, that’s priceless to your partner (or your fans!) I’m pleased to say that we donated all $420 of the proceeds (yes, that was the winning bid) to SWOP Behind Bars. My followers have a generous sense of humor.
These days, I will occasionally make more CAP+ molds to raffle off to my OnlyFans subscribers, and it’s a fun one-of-a-kind gift I enjoy offering every once in a while. Now I just need to go make my Clone-A-Pussy+ and my boyfriend’s Clone-A-Willy fuck each other… for research.
